All Issue

2023 Vol.33, Issue 1 Preview Page

Technical Note

A Study on Evaluation of Rock Brittleness Index using Punch Penetration Test

압입시험을 이용한 암석의 취성도 평가에 관한 연구

Hoyoung Jeong1*
정 호영1*
1Assistant Professor, Department of Energy Resources Engineering, Pukyong National University
1부경대학교 에너지자원공학과 조교수
*Corresponding Author
28 February 2023. pp. 29-41
PDF XML Citation
Abstract

The brittleness of rocks plays an important role in determining the fragmentation and failure behavior of rock. However, there is still no standard method to evaluate the brittleness of rock, and previous studies have suggested the several definitions for estimation of brittleness of rock. Even in the process of mechanical rock excavation and drilling, the brittleness of rock is considered as an important property for evaluating the excavation efficiency of mechanical excavators or boreability of rock. The previous studies have been carried out to investigate the correlation between different brittleness of rock and cutting efficiency and boreability of rock. This study introduced a method for calculating the brittleness of rock from punch penetration test, and analyzed the correlation between the brittleness of rock calculated by the uniaxial compressive and Brazilian tensile strengths and that from punch penetration test. From the results of correlation analysis, the relationship between various brittleness was confirmed, and it was found that PSI and BI3 showed a good correlation with the strength-based brittleness index. In addition, the results indicated that B3 and B4 are suitable to represent the brittleness of rock in the field of mechanical rock excavation.

Keywords
Brittleness Index
Punch penetration test
Rock
Mechanical excavation

암석의 취성은 암석의 파쇄 및 파괴특성에 주요한 영향을 미치는 인자로 알려져 있으나, 현재까지 표준화된 정의가 없고 연구자들은 취성을 정의하기 위한 다양한 취성도의 산정방식을 제안하여 오고 있다. 암석의 드릴링 및 암반의 기계굴착과정에서도 암석의 취성은 기계굴착장비의 굴진효율 혹은 암석의 굴진저항성을 평가하기 위한 중요한 파라미터로 평가되고 있으며, 다양한 취성도와 기계굴착장비의 굴진효율 사이의 상관관계를 규명하려는 연구들이 지속적으로 수행되고 있다. 본 연구에서는 압입시험으로부터 암석의 취성도를 산출하기 위한 방법에 대하여 소개하고, 압입시험에서 산정되는 취성도와 기존의 암석의 일축압축강도와 간접인장강도로부터 계산되는 기존의 취성도의 상관관계에 대하여 분석하고자 하였다. 상관관계분석 결과로부터 다양한 취성도들 간의 상관관계를 확인할 수 있었으며, 압입시험으로부터 계산되는 PSI와 BI3가 기존의 취성도들과 좋은 상관관계를 보임을 확인하였다. 또한 기존의 취성도 중에서는 B3와 B4가 암반기계굴착분야에서의 굴진효율 및 굴진저항성을 나타내기에 적합한 취성도인 것으로 판단되었다.

키워드
취성도
압입시험
암석
기계굴착
References
1
Altindag, R., 2002, The evaluation of rock brittleness concept on rotary blast hold drills. Journal of the Southern African Institute of Mining and Metallurgy, 102.1, 61-66.
2
Altindag, R., 2003, Correlation of specific energy with rock brittleness concepts on rock cutting. Journal of the Southern African Institute of Mining and Metallurgy, 103.3, 163-171.
3
Altindag, R., 2010, Assessment of some brittleness indexes in rock-drilling efficiency. Rock Mech. Rock Eng. 43, 361-370. 10.1007/s00603-009-0057-x
4
Bruland, A., 1998, Hard rock tunnel boring: Drillability test methods (Vol. 8), Ph.D thesis, Norwegian University of Science and Technology, Trondheim, Norway.
5
Chen, J., Zhang, G., Chen, H., and Yin, X., 2014, The construction of shale rock physics effective model and prediction of rock brittleness, In 2014 SEG Annual Meeting, Denver, Colorado, USA, October 2014. 10.1190/segam2014-0716.1
6
Cook, N.G.W., Hood, M., and Tsai, F., 1984, Observations of crack growth in hard rock loaded by an indenter, Int. J. Rock Mech. Min. Sci. 3 Geomech. Abstr., 21.2, 97-107. 10.1016/0148-9062(84)91177-X
7
Copur, H., 1999, Theoretical and Experimental Studies of Rock cutting with Drag bits toward the development of a performance prediction model for roadheaders, Ph.D. Thesis, Colorado School of Mines, T 5259, Colorado, USA
8
Copur, H., Bligin, N., Tuncdemor, H., and Balci, C., 2003, A set of indices based on indentation tests for assessment of rock cutting performance and rock properties, The Journal of The South African Institute of Mining and Metallurgy, 103.9, 589-600.
9
Dollinger, G.L., Handewith, H.J., and Breeds, C.D., 1998, Use of the punch test for estimation TBM performance, Tunn. Undergr. Sp. Tech., 13.4, 403-408. 10.1016/S0886-7798(98)00083-2
10
Dursun, A.E. and Gokay, M.K., 2016, Cuttability assessment of selected rocks through different brittleness values, Rock Mechanics and Rock Engineering, 49, 1173-1190. 10.1007/s00603-015-0810-2
11
Goktan, R.M., 1991, Brittleness and micro-scale rock cutting efficiency, Mining Science and Technology, 13.3, 237-241. 10.1016/0167-9031(91)90339-E
12
Gong, Q.M. and Zhao, J., 2007, Influence of rock brittleness on TBM penetration rate in Singapore granite, Tunn. Undergr. Sp. Tech., 22.3, 317-324. 10.1016/j.tust.2006.07.004
13
Handewith, H.J., 1970, Predicting the economic success of continuous tunneling and hard rock. 71st Annual General Meeting of the CIM, 63, 595-599.
14
Hucka, V. and Das, B., 1974, Brittleness determination of rocks by different methods, Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 11.10, 389-392. 10.1016/0148-9062(74)91109-7
15
Jeong, H.Y., Cho, J.W., Jeon, S., and Rostami, J., 2016, Performance assessment of hard rock TBM and rock boreability using punch penetration test, Rock Mech. Rock Eng., 49, 1517-1532. 10.1007/s00603-015-0834-7
16
Jeong, H.Y., Jeon, S., and Cho, J.W., 2012, A study on punch penetration test for performance estimation of tunnel boring machine, Tunn. Undergr. Sp., 22.2, 144-156. 10.7474/TUS.2012.22.2.144
17
Kahraman, S., 2002, Correlation of TBM and drilling machine performances with rock brittleness. Engineering Geology, 65.4, 269-283. 10.1016/S0013-7952(01)00137-5
18
Liang, L., Liu, X., Xiong, J., Wu, T., and Ding, Y., 2017, New model to evaluate the Brittleness in shale formation, In International Geophysical Conference, Qingdao, China, April 2017, 1248-1251. 10.1190/IGC2017-317
19
Luan, X., Di, B., Wei, J., Li, X., Qian, K., Xie, J., and Ding, P., 2014, Laboratory measurements of brittleness anisotropy in synthetic shale with different cementation, In 2014 SEG Annual Meeting, Denver, Colorado, USA, October 2014. 10.1190/segam2014-0432.1
20
Meng, F., Wong, L. N. Y., and Zhou, H., 2021, Rock brittleness indices and their applications to different fields of rock engineering: A review, Journal of Rock Mechanics and Geotechnical Engineering, 13.1, 221-247. 10.1016/j.jrmge.2020.06.008
21
Meng, F., Zhou, H., Zhang, C., Xu, R., and Lu, J., 2015, Evaluation methodology of brittleness of rock based on post-peak stress-strain curves. Rock Mech. Rock Eng., 48.5, 1787-1805. 10.1007/s00603-014-0694-6
22
Mohammadi, S.D., Torabi-Kaveh, M., and Bayati, M., 2015, Prediction of TBM penetration rate using intact and mass rock properties (case study: Zagros long tunnel, Iran), Arab. J. Geosci, 8, 3893-3904. 10.1007/s12517-014-1465-0
23
Özfırat, M.K., Yenice, H., Şimşir, F., and Yaralı, O., 2016, A new approach to rock brittleness and its usability at prediction of drillability, Journal of African Earth Sciences, 119, 94-101. 10.1016/j.jafrearsci.2016.03.017
24
Rickman, R., Mullen, M., Petre, E., Grieser, B., and Kundert, D., 2008, A practical use of shale petrophysics for stimulation design optimization: All shale plays are not clones of the Barnett Shale, In SPE annual technical conference and exhibition, Denver, Coloreado, USA, September 2008. 10.2118/115258-MS
25
Singh, S.P., 1986, Brittleness and the mechanical winning of coal, Mining Science & Technology, 3, 173-180. 10.1016/S0167-9031(86)90305-1
26
Yagiz, S., 2002, Development of rock fracture and brittleness indices to quantify the effects of rock mass features and toughness in the CSM model basic penetration for hard rock tunneling machines, Ph.D. Thesis, Colorado School of Mines, T 5605, Colorado, USA
27
Yagiz, S., 2009, Assessment of brittleness using rock strength and density with punch test, Tunn. Undergr. Sp. Tech., 24.1, 66-74. 10.1016/j.tust.2008.04.002
28
Yarali, O. and Kahraman, S., 2011, The drillability assessment of rocks using the different brittleness values, Tunn. Undergr. Sp. Tech., 26.2, 406-414. 10.1016/j.tust.2010.11.013
Information
  • Publisher :Korean Society for Rock Mechanics and Rock Engineering
  • Publisher(Ko) :한국암반공학회
  • Journal Title :Tunnel and Underground Space
  • Journal Title(Ko) :터널과 지하공간
  • Volume : 33
  • No :1
  • Pages :29-41
  • Received Date : 2023-02-06
  • Revised Date : 2023-02-20
  • Accepted Date : 2023-02-20
  • DOI :https://doi.org/10.7474/TUS.2023.33.1.029
Journal Informaiton Tunnel and Underground Space Tunnel and Underground Space
Online Submission
Archives
: Vol.27, 2017 ~
  • NRF
  • KOFST
  • KISTI Current Status
  • KISTI Cited-by
  • crosscheck
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close