Tunnel and Underground SpaceISSN:1225-1275(Print) 2287-1748(Online)한국암반공학회

Al-Salloum, Y., Almusallam, T., Ibrahim, S.M., Abbas, H., and Alsayed, S., 2015, Rate dependent behavior and modeling of concrete based on SHPB experiments, Cement and Concrete Composites, 55, 34-44.

Barros, J., Costelha, H., Bento, D., Brites, N., Luís, R., Patrício, H., Cunha, V., Bento, L., Miranda, T., Coelho, P., Azenha, M., Neves, C., Salehian, H., Moniz, G., Nematollahi, M., Teixeira, A., Taheri, M., Mezhyrych, A., Hosseinpour, E., Correia, T., Kazemi, H., Hassanshahi, O., Rashiddel, A., and Esmail, B., 2024, A multidisciplinary engineering-based approach for tunnelling strengthening with a new fibre reinforced shotcrete technology, Tunnelling and Underground Space Technology, 147, 105707.

Bi, Z., Liu, J., Zhao, M., and Cui, X., 2025, Research on dynamic constitutive model of concrete material with different matrix strength under medium-high strain rates, KSCE Journal of Civil Engineering, 29(3), 100059.

Bischoff, P.H., and Perry, S.H., 1991, Compressive behaviour of concrete at high strain rates, Materials and Structures, 24(6), 425-450.

CEB, 1993, CEB-FIP Model Code 1990, Thomas Telford Ltd., Lausanne, Switzerland.

Chen, X., Wu, S., and Zhou, J., 2013, Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete, Construction and Building Materials, 47, 419-430.

Du, C., Song, S., Wang, H., Wu, B., and Li, Y., 2026, Research on strain rate effect of three dynamic constitutive models for UHPC, Journal of Dynamic Disasters, 100052.

Fan, H., Yu, H., and Ma, H., 2023, Dynamic increase factor (DIF) of concrete with SHPB tests: Review and systematic analysis, Journal of Building Engineering, 79, 107666.

Fib-federation internationale du beton (FIP), 2013, fib model code for concrete structures 2010, John Wiley and Sons.

Frew, D.J., Forrestal, M.J., and Chen, W., 2001, A split Hopkinson pressure bar technique to determine compressive stress-strain data for rock materials, Experimental Mechanics, 41(1), 40-46.

Frew, D.J., Forrestal, M.J., and Chen, W., 2002, Pulse shaping techniques for testing brittle materials with a split Hopkinson pressure bar, Experimental Mechanics, 42(1), 93-106.

Gray, G.T. III, 2000, Classic split-Hopkinson pressure bar testing, in Mechanical Testing and Evaluation, ASM International, 462-476.

Grote, D.L., Park, S.W., and Zhou, M., 2001, Dynamic behavior of concrete at high strain rates and pressures: I. experimental characterization, International Journal of Impact Engineering, 25(9), 869-886.

Guo, T., Xie, Y., and Weng, X., 2018, Evaluation of the bond strength of a novel concrete for rapid patch repair of pavements, Construction and Building Materials, 186, 790-800.

Guo, Y.B., Gao, G.F., Jing, L., and Shim, V.P.W., 2017, Response of high-strength concrete to dynamic compressive loading, International Journal of Impact Engineering, 108, 114-135.

Hao, Y., Hao, H., Jiang, G.P., and Zhou, Y., 2013, Experimental confirmation of some factors influencing dynamic concrete compressive strengths in high-speed impact tests, Cement and Concrete Research, 52, 63-70.

Holmquist, T.J., and Johnson, G.R., 2011, A computational constitutive model for glass subjected to large strains, high strain rates and high pressures, Journal of Applied Physics, 110(9), 093514.

Jiang, H., Chen, Z., Fang, Z., Fang, S., Tu, W., Mo, F., Xie, S., and Liu, J., 2025, Rapid hardening high performance concrete (RHHPC) for bridge expansion joints: From material properties to interfacial shear performance, Construction and Building Materials, 458, 139638.

Kolsky, H., 1949, An investigation of the mechanical properties of materials at very high rates of loading, Proceedings of the Physical Society, Section B, 62(11), 676.

Kong, X., Fang, Q., Chen, L., and Wu, H., 2018, A new material model for concrete subjected to intense dynamic loadings, International Journal of Impact Engineering, 120, 60-78.

KSRM, 2005a, Standard method for sampling and preparation of rock test specimen, Tunnel and Underground space, 15(2), 81-84.

KSRM, 2005b, Standard test method for uniaxial compressive strength of rock, Tunnel and Underground space, 15(2), 85-86.

Lee, S.G., Kim, D.E., Lee, C.Y., and Kim, J.H., 2004, A Study on the Geotechnical Charateristics of Corestone Ground Mass, Journal of the Korean Society of Environmental Restoration Technology, 7(1), 68-76.

Malvar, L.J., Crawford, J.E., Wesevich, J.W., and Simons, D., 1997, A plasticity concrete material model for DYNA3D, International Journal of Impact Engineering, 19(9-10), 847-873.

Muthuraja, M., Ranjithkumar, S., Khaderi, S.N., and Suriya Prakash, S., 2024, High-strain-rate compression behavior of ultrahigh-performance concrete at different ages, Journal of Materials in Civil Engineering, 36(11), 04024349.

Oh, S.W., and Cho, S.H., 2020, Analysis of experimental techniques for determining dynamic properties of rock, Explosives and Blasting, 38(3), 30-43.

Oh, S.W., Min, K.J., Park, S.W., Park, H., Seok, C.G., and Cho, S.H., 2019, A study on the effect of dynamic load distribution characteristics in rock specimens on dynamic uniaxial compressive strength, Explosives and Blasting, 37(1), 14-23.

Pyo, S., El-Tawil, S., and Naaman, A.E., 2016, Direct tensile behavior of ultra high performance fiber reinforced concrete (UHP-FRC) at high strain rates, Cement and Concrete Research, 88, 144-156.

Riedel, W., Kawai, N., and Kondo, K.I., 2009, Numerical assessment for impact strength measurements in concrete materials, International Journal of Impact Engineering, 36(2), 283-293.

Tedesco, J.W., Powell, J.C., Ross, C.A., and Hughes, M.L., 1997, A strain-rate-dependent concrete material model for ADINA, Computers & Structures, 64(5-6), 1053-1067.

Teng, X., Lu, C., Li, C., and Chen, Z., 2023, Investigation on shear mechanical behavior of the interface between sulphoaluminate cement (SAC)-ECC and existing concrete, Construction and Building Materials, 403, 133184.

Union Co., Ltd., 2021, Material safety data sheet (MSDS) for Grout JM, http://www.unioncement.com/product/product03_01_02_1.php

Union Co., Ltd., 2024, Material safety data sheet (MSDS) for external retarder, http://www.unioncement.com/product/product03_01_02_1.php

Wang, J., Long, G., Xiang, Y., Dong, R., Tang, Z., Xiao, Q., Yang, Z., and Ma, K., 2022, Influence of rapid curing methods on concrete microstructure and properties: A review, Case Studies in Construction Materials, 17, e01600.

Wang, S.M., Li, X.B., Gong, F.Q., and Zhu, J.J., 2013, Experimental study on mechanical properties of different ages concrete under static and dynamic load, Engineering Mechanics, 30(2), 143-149.

Wang, Z., Bai, E., Huang, H., and Ren, B., 2023a, Effect of strength grade on mechanical properties of concrete under dynamic load, Structural Concrete, 24(3), 3646-3655.

Wang, Z., Bai, E., Liu, C., Qin, L., and Lv, Y., 2023b, Early age dynamic mechanical properties of basalt fiber reinforced early strength concrete, Structural Concrete, 24(6), 7648-7659.

Xia, K., and Yao, W., 2015, Dynamic rock tests using split Hopkinson (Kolsky) bar system-A review, Journal of Rock Mechanics and Geotechnical Engineering, 7(1), 27-59.

Yang, Q.B., Zhu, B.R., and Wu, X., 2000, Characteristics and durability test of magnesium phosphate cement-based material for rapid repair of concrete, Materials and Structures, 33(4), 229-234.

Yasin, A.K., Bayuaji, R., and Susanto, T.E., 2017, A review in high early strength concrete and local materials potential, IOP Conference Series: Materials Science and Engineering, 267(1), 012004.

Zhang, C., Wang, Z., Wang, C., Ouyang, W., Wang, J., Chen, T., and Bai, E., 2025, Dynamic mechanical properties and constitutive model of early strength concrete at different age, Journal of Advanced Concrete Technology, 23(8), 353-362.

Zhang, H., Ji, T., Liu, H., and Su, S., 2021, Improving the sulfate resistance of recycled aggregate concrete (RAC) by using surface-treated aggregate with sulfoaluminate cement (SAC), Construction and Building Materials, 297, 123535.

Zhang, Q.B., and Zhao, J., 2014, A review of dynamic experimental techniques and mechanical behaviour of rock materials, Rock Mechanics and Rock Engineering, 47(4), 1411-1478.

Zhou, J.K., and Ge, L.M., 2015, Effect of strain rate and water-to-cement ratio on compressive mechanical behavior of cement mortar, Journal of Central South University, 22(3), 1087-1095.

Zhou, X.Q., and Hao, H., 2008, Modelling of compressive behaviour of concrete-like materials at high strain rate, International Journal of Solids and Structures, 45(17), 4648-4661.

Zhu, Z., Ding, Y., Dong, J., Chen, S., Han, W., Ma, C., and Ma, K., 2025, Preparation and numerical analysis of shotcrete with high early strength and performance used for the repair of disaster-damaged tunnels, Structures, 80, 109927.