Voronoi Grain-Based Distinct Element Modeling of Thermally Induced Fracture Slip: DECOVALEX-2023 Task G (Benchmark Simulation)

Jung-Wook Park; Chan-Hee Park; Changsoo Lee

doi:10.7474/TUS.2021.31.6.593

All Issue

2021 Vol.31, Issue 6 Preview Page Next Page

Original Article

Voronoi Grain-Based Distinct Element Modeling of Thermally Induced Fracture Slip: DECOVALEX-2023 Task G (Benchmark Simulation) Voronoi 입자기반 개별요소모델을 이용한 암석 균열의 열에 의한 미끄러짐 해석: 국제공동연구 DECOVALEX-2023 Task G(Benchmark simulation)

31 December 2021. pp. 593-609

PDF XML

Abstract

We proposed a numerical method for the thermo-mechanical behavior of rock fracture using a grain-based distinct element model (GBDEM) and simulated thermally induced fracture slip. The present study is the benchmark simulation performed as part of DECOVALEX-2023 Task G, which aims to develop a numerical method to estimate the coupled thermo-hydro-mechanical processes within the crystalline rock fracture network. We represented the rock sample as an assembly of Voronoi grains and calculated the interaction of the grains (blocks) and their interfaces (contacts) using a distinct element code, 3DEC. Based on an equivalent continuum approach, the micro-parameters of grains and contacts were determined to reproduce rock as an elastic material. Then, the behavior of the fracture embedded in the rock was characterized by the contacts with Coulomb shear strength and tensile strength. In the benchmark simulation, we quantitatively examined the effects of the boundary stress and thermal stress due to heat conduction on fracture behavior, focusing on the mechanism of thermally induced fracture slip. The simulation results showed that the developed numerical model reasonably reproduced the thermal expansion and thermal stress increment, the fracture stress and displacement and the effect of boundary condition. We expect the numerical model to be enhanced by continuing collaboration and interaction with other research teams of DECOVALEX-2023 Task G and validated in further study experiments.

Keywords

Thermally Induced Fracture Slip

DECOVALEX-2023

Grain-Based Distinct Element Model

Voronoi Diagram

본 연구에서는 입자기반 개별요소모델(grain-based distinct element model, GBDEM)을 이용하여 결정질 암석 내 포함된 균열의 열-역학적 거동을 평가할 수 있는 수치해석기법을 제시하고 열에 의한 균열의 미끄러짐 거동을 해석하였다. 이는 DECOVALEX-2023 프로젝트 Task G의 일환으로 수행된 벤치마크 모델링 연구로, Task G는 결정질 암반 내 균열의 열-수리-역학적 복합거동을 해석하기 위한 수치해석기법을 개발하는 데에 목표가 있다. 여기에서는 Voronoi diagram을 이용하여 다면체 개별입자의 집합체로서 해석모델을 생성하고, 입자 및 입자간 접촉에서 발생하는 열-역학적 거동을 개별요소프로그램인 3DEC을 통해 해석하였다. 암석 시험편의 탄성거동을 재현하기 위하여 등가연속체 개념을 적용하여 입자와 접촉의 미시물성을 산정하였으며, 균열에 상응하는 접촉에는 Coulomb slip model을 부여하여 인장강도와 전단강도를 갖는 불연속면을 모사하였다. 경계응력과 열응력에 의한 균열의 거동을 수치적으로 모델링하였으며, 경계조건에 따라 균열의 미끄러짐이 발생하는 열-역학적 메커니즘을 정량적으로 분석하였다. 해석 결과, 본 연구에서 제시한 해석모델이 암석 내 열팽창과 열응력의 증가, 균열 응력과 변위, 경계조건의 영향 등을 합리적으로 재현하고 있음을 확인하였다. 본 연구의 해석모델은 Task G에 참여하는 국외 연구팀들과의 의견 교류와 워크숍을 통해 지속적으로 개선하는 한편, 향후 실내실험에 적용하여 타당성을 검증할 예정이다.

키워드

열에 의한 균열 미끄러짐

DECOVALEX-2023

입자기반 개별요소모델

3DEC

Voronoi Diagram

References

Fu, T.F., Xu, T., Heap, M.J., Meredith, P.G., and Mitchell, T.M., 2020, Mesoscopic time-dependent behavior of rocks based on three-dimensional discrete element grain-based model. Computers and Geotechnics 121, 103472. 10.1016/j.compgeo.2020.103472

Geuzaine, C. and Remacle, J. F., 2009, Gmsh: A 3‐D finite element mesh generator with built‐in pre‐and post‐processing facilities. International journal for numerical methods in engineering 79(11), 1309-1331. 10.1002/nme.2579

Ghazvinian, E., Diederichs, M.S., and Quey, R., 2014, 3D random Voronoi grain-based models for simulation of brittle rock damage and fabric-guided micro-fracturing. Journal of Rock Mechanics and Geotechnical Engineering 6(6), 506-521. 10.1016/j.jrmge.2014.09.001

IAEA, 2011, Geological disposal facilities for radioactive waste. Specific safety guide No. SSG-14, IAEA, Vienna, Austria.

Itasca Consulting Group Inc., 2021. 3DEC (3 Dimensional Distinct Element Code) online manual. Available at https://www.itascacg.com/software/3DEC

Jaeger, J.C., Cook, N.G.W., and Zimmerman, R.W., 2007, Fundamentals in Rock Mechanics. fourth ed. Oxford: Blackwell publishing.

Birkholzer, J.T., Tsang, C.F., Bond, A.E., Hudson, J.A., Jing, L., and Stephansson, O., 2019, 25 years of DECOVALEX-Scientific advances and lessons learned from an international research collaboration in coupled subsurface processes. International Journal of Rock Mechanics and Mining Sciences 122, 103995. 10.1016/j.ijrmms.2019.03.015

Kim, T., Lee, C., Kim, J.W., Kang, S., Kwon, S., Kim, K.I., Park, J.W., Park, C.H., and Kim, J.S., 2021, Introduction to Tasks in the International Cooperation Project, DECOVALEX-2023 for the Simulation of Coupled Thermohydro-mechanical-chemical Behavior in a Deep Geological Disposal of High-level Radioactive Waste. Tunnel and Underground Space, 31(3), 167-183.

Lan, H.X., Martin, C.D., and Hu, B., 2010, Effect of heterogeneity of brittle rock on micromechanical extensile behavior during compression loading. Journal of Geophysical Research: Solid Earth 115, B1. 10.1029/2009JB006496

Lee, C., Lee, J., Park, S., Kwon, S., Cho, W.J., and Kim, G.Y., 2020, Numerical analysis of coupled thermo-hydro-mechanical behavior in single-and multi-layer repository concepts for high-level radioactive waste disposal. Tunnelling and Underground Space Technology, 103, 103452. 10.1016/j.tust.2020.103452

Lee, J., Cho, D., Choi, H., and Choi, J., 2007, Concept of a Korean reference disposal system for spent fuels. Journal of Nuclear Science and Technology, 44(12), 1565-1573. 10.1080/18811248.2007.9711407

Park, J.W., Park, C., Song, J. W., Park, E. S., and Song, J. J., 2017, Polygonal grain-based distinct element modeling for mechanical behavior of brittle rock. International Journal for Numerical and Analytical Methods in Geomechanics 41(6), 880-898. 10.1002/nag.2634

Park, J.W., Park, C.H., Lee, C., 2021. Hydro-Mechanical Modeling of Fracture Opening and Slip using Grain-Based Distinct Element Model: DECOVALEX-2023 Task G (Benchmark Simulation). Tunnel and Underground Space, 31(4), 270-288.

Park, J.W., Park, C.H., Yoon, J.S., and Lee, C., 2020, Grain-Based Distinct Element Modelling of the Mechanical Behavior of a Single Fracture Embedded in Rock: DECOVALEX-2023 Task G (Benchmark Simulation). Tunnel and Underground Space, 30(6), 573-590.

Quey, R., Dawson, P.R., and Barbe, F., 2011, Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing. Computer Methods in Applied Mechanics and Engineering, 200(17-20), 1729-1745. 10.1016/j.cma.2011.01.002

Sun, C., Zhuang, L., Jung, S., Lee, J., and Yoon, J.S., 2021, Thermally induced slip of a single sawcut granite fracture under biaxial loading. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 7(4), 1-13. 10.1007/s40948-021-00293-y

Wang, Z., Wang, T., Wu, S., and Hao, Y., 2021, Investigation of microcracking behaviors in brittle rock using polygonal grain‐based distinct method. International Journal for Numerical and Analytical Methods in Geomechanics. 10.1002/nag.3246

Zoback, M.D. and Gorelick, S.M., 2012, Earthquake triggering and large-scale geologic storage of carbon dioxide, Proceedings of the National Academy of Sciences of the United States of America 109(26), 10164-10168. 10.1073/pnas.120247310922711814PMC3387039

Information

Publisher :Korean Society for Rock Mechanics and Rock Engineering
Publisher(Ko) :한국암반공학회
Journal Title :Tunnel and Underground Space
Journal Title(Ko) :터널과 지하공간
Volume : 31
No :6
Pages :593-609
Received Date : 2021-12-09
Revised Date : 2021-12-12
Accepted Date : 2021-12-13
DOI :https://doi.org/10.7474/TUS.2021.31.6.593

Tunnel and Underground SpaceISSN:1225-1275(Print) 2287-1748(Online)한국암반공학회

All Issue